Shenzhen Lizhifeng Electronic Equipment Co., Ltd

Speciality

The brightness of each pixel in the image is automatically calibrated to obtain a clearer and real image.

Substantial improvement of detection capability
The new MLT lighting technology has successfully improved the inspection ability of soldering tin in the process after the furnace, especially the inspection ability of component warping and pin warping.

Low angle oblique lighting is added on the basis of the original traditional lighting mode (i.e. coaxial vertical falling lighting and oblique lighting).

parameter

Check the size range of base plate: 50× 60 - 250× 330mm

Base plate thickness range: 0.6mm - 2.5mm

Flatness of base plate:/- 2mm

Clear height above and below baseplate: 20mm above baseplate: 30mm below baseplate

Parts rotation inspection available: 0 - 359° Rotating parts (unit: 1°)

Main inspection items: missing parts, offset, side standing, monument, inversion, polarity reversal, tin connection, dirt contamination, Wuxi, little tin, faulty soldering, component cocking, abnormal welding

Image scanning time: about 23 seconds (250× 330mm)

Check speed * 3 seconds/10000 windows (reference data)

Incoming/outgoing time is about 3 seconds

Resolution 10 μ m

(Image processing) Color linear CCD

Lighting LED lighting

Transmission mode: belt

Rail height: 900/- 20mm

Track width adjustment manual

BF View Connection

Optional barcode recognition function (2D)

Special printing machine

Single phase power supply~100 - 120V/200 - 240V/- 10%,

50/60Hz

Power consumption 500VA

Air pressure 0.5MPa, 5L/min (ANR)

Ambient temperature/humidity 15 - 30 ℃/15 - 80% RH (no frost)

Equipment dimensions W x D x H 600× 915 × 1515mm

Weight: about 300kg